Monk Shiver Safety Guide

Cold is powerful. Electricity is powerful. Respect both – and they will reward you.
Read this section carefully before first use.

⚠️ General Safety

1. Operators must be 18 years or older.
2. Never use the chiller with wet hands.
3. Keep the power cord free from heavy objects and never run it under carpets.
4. Do not insert objects into the chiller’s vents or openings.
5. Always exercise caution around children, the elderly, or anyone with mobility issues.
6. Ensure at least 100cm of clear space around vents for airflow. Do not place in cupboards, closets, or tight enclosures.
7. Never disassemble or modify the chiller. For electrical concerns, contact Monk only.
8. Avoid using the chiller in very humid or dusty conditions.
9. Keep pets and children away during operation.
10. If you notice damage, leaks, unusual noises, smells, or performance issues, switch off and unplug immediately.
11. Disconnect the chiller from power before cleaning or maintenance.
12. Do not place the chiller in direct sunlight or near heat sources.
13. Always ensure the filter is installed while operating.
14. Clean the water filter and dust net regularly for best performance.
15. If ambient temperature drops to 0°C (32°F) or lower, disconnect the pipes and fully drain the chiller to prevent freezing damage.
16. Before switching on, ensure the tub is filled and all water pipes are connected correctly. Running the pump dry will reduce its lifespan.
17. Do not extend the water hose, as this may reduce cooling efficiency or prevent the system from reaching the target temperature.

⚠️ Electrical Safety

1. Always keep the chiller upright on a flat, stable surface. Never invert.
2. After transportation, allow 24 hours before first use for refrigeration gas to settle.
3. Plug the unit directly into a suitable AC wall socket (or a rated extension cable) that is grounded.
4. Keep the chiller dry at all times. Do not immerse, spray, or splash water on the unit. If it becomes wet, unplug immediately and do not use.
5. Keep the chiller as dry as possible. It is IPX4 rated and resistant to light splashes, but must not be immersed, sprayed directly, or exposed to heavy water. If it becomes wet, unplug it immediately and do not use until fully dry and safe to operate.
6. Ensure both the chiller and the plug socket are kept away from water while you are immersed in the tub.
7. If the chiller does not switch on, or stops unexpectedly, unplug it immediately and do not continue use.
8. Monk accepts no responsibility for misuse or failure to use this equipment as safely instructed.
    

Operating Conditions

• Working Temperature: 3°C – 45°C (38°F – 113°F)
• Storage Temperature (when drained): -20°C – 55°C (-4°F – 131°F)
• Storage Relative Humidity: 20% – 85%