Changing the water 🚰

Changing the water or emptying your Monk is simple. 

Step 1: Turn Monk off. Open the hatch doors and wait till the cooling unit fan is stationary.

Step 2: Connect the Monk hose to the hose pipe connector, to the left of the cooling unit, and place the other end in a drain or sink

Step 3: Turn the blue handle on the drain valve away from you to open the valve 45°, which will let the water flow

Step 4: Turn Monk on, and after 60 seconds it will automatically start to drain

Step 5:  When the water level reaches just above the internal black nozzles, turn Monk off (never let it go past this, as it will pump air through the system which could damage it and void your warranty)

Step 6: Return the drain valve handle to its original position to close the value. Remove the hose, and close the hatch doors

Step 7: There will be a small amount of water left in Monk, which can be removed manually, or via an external submersible pump

Step 8: Remove the filter housing and discard the water left in the filter housing, following Changing Monk's Filter guide. You may wish to change the filter at the same time

Step 9: The inside of Monk can then be dried with a cloth or towel

Frequency ⏰

Every 2 months at minimum, depending on usage. We recommend coinciding with a more regular filter change every month if you're using the bath multiple times a week.