Step 1: Drain Monk by following our Changing the Water guide. Check that Monk is turned off
Step 2: Open the hatch doors to access the filter
Step 3: Place a towel underneath the filter housing, as water may spill out
Step 4: Unscrew the filter housing clockwise. Carefully remove it, and discard the water and filter inside from inside the filter housing
Step 5: Give the filter housing a rinse, with clean water and a little soap if necessary
Step 6: Remove all packaging from the new filter and place it inside the filter housing
Step 7: Screw the filter housing anti-clockwise into the filter lid, and ensure it is tightly assembled. You may need to use both hands to do this
Step 8: Now you’re ready to refill Monk. Once the water is over the minimum fill line (this is the lowest of the three fill lines), you can turn Monk on and the water housing will refill with circulating water
Frequency 🗓️
We recommend changing the filter every 4 weeks, depending on usage or when the filter is visibly discoloured.
Comments
0 comments
Article is closed for comments.