Filling Monk 🚿

🚰 Always fill your Monk with fresh tap water, and never fill from a swimming pool or other water source. Your Monk comes with a 6m hose for ease. Never turn Monk on unless there is water above the black nozzles on the inside seat, otherwise you can pump air through the system which could damage it.

Step 1: While Monk is turned off, simply attach one end of the hose to a tap, and put the other end inside Monk. If the tap is warm, let it run for a few seconds until it turns as cold as it can go.

Step 2: Turn on the water supply. Fill Monk to the required level, using the three fill lines located next to the internal light as a guide (low, medium and high). If you’re unsure, we recommend the lowest level to avoid displacement – you can easily top it up after your first plunge, once you’ve seen how high the water rises upon submersion.

Step 3: Turn off the tap, and you’re done!

Filling guides

🔴 Low: 170 litre fill line 50kg users

🟠 Medium: 200 litre fill line 75kg users

🟢 High: 270 litre fill line 100kg users