Always fill your Origin with fresh tap water, and never fill from a swimming pool or other water source. Your Monk comes with a 6m hose for ease. Never turn your Origin on unless there is water above the black nozzles on the inside seat, otherwise you can pump air through the system which could damage it.
Important: If your Origin was delivered after June 30 2025, or if we visited and we removed your non-return valves, use Option 2. If not, use Option 1.
Option 1
a. Simply connect one end of your hose to a tap, and place the other end securely inside your Origin.
b. Turn on the water supply. Fill Origin to the required level, using the three fill lines located next to the internal light as a guide (low, medium and high). If you’re unsure, we recommend the lowest level to avoid displacement – you can easily top it up after your first plunge once you’ve seen how high the water rises upon submersion.
c. Then turn off the tap, and that's complete!
Option 2
a. Simply connect one end of your hose to a tap, and connect the other end to the hose pipe connector, behind the hatch doors in the back of your Origin unit.
b. Turn the blue lever handle on the hose pipe connector away from you, to open the valve 45°
c. Turn on the water supply and fill Origin to the required level, using the three fill lines located next to the internal light as a guide (low, medium and high). If you’re unsure, we recommend the lowest level to avoid displacement – you can easily top it up after your first plunge once you’ve seen how high the water rises upon submersion.
d. Then turn off the tap, then turn the blue lever handle 45° towards you to close the valve, and remove the hose pipe. This step is complete!
Filling guides
🔴 Low: 170 litre fill line 100kg users
🟠 Medium: 200 litre fill line 75kg users
🟢 High: 270 litre fill line 50kg users
Comments
0 comments
Article is closed for comments.