The Monk Origin Control Panel

1. Temperature and timer display

The current water temperature is always shown as default. It will also show the timer when activated.

2. Timer & toggle

BEGIN TIMER: Short press of the main button

END TIMER: Long press (3 second hold). The session time will continue to display for 60 seconds before reverting to neutral/home status.

TOGGLE: Two short presses will toggle back to the temperature while the timer is still running. The display will show the temperature for 5 seconds, before reverting back to the timer.

3. Temperature controls 

Press the up and down buttons to choose the desired ‘set point’ temperature. Origin will display the set point temperature for 5 seconds before reverting back to the current temperature.

4. Cooling guides 

Blue lines will indicate that Origin’s cooling to reach the set point, and orange lines will indicate that it’s heating to reach the set point. Each line represents two degrees.

5. Light control

Press to toggle between 6 different light settings for enhanced ambience and aesthetics.

6. Airplane mode

Hold down and orange light will come on. This mode disables all bluetooth and wifi connectivity. Note that your Origin will not collect any health metric or plunge session data while in this mode. Hold button to deactivate.